IP66 Brightest LED Rechargeable Searchlight Torch For Hunting
IP66 Brightest Rechargeable Led Handheld Flashlight For Hunting
Characteristics of flashlight
1. Fine pen fork, easy to carry, is a good helper for outdoor
travel.
2. The surface of this flashlight is three-stage hard oxidation
treatment, which is not easy to paint off, and it feels very good!
| brand: | Everbright |
| model: | EB8060 |
| Rated voltage: | 11.1V |
| Protection level: | IP66 |
| light source: | lmportLED |
| Battery: | 4. 4Ah |
| Continuous working hours: | Workirng light16h |
| Strong light: | 8h |
| size: | 216*184* 120mm |
| weight: | 1.65Kg |
Instructions for Use
1. Check the batteries to ensure that the batteries are electrified
and installed in the correct direction as torches;
2. Charging time is ≤8 hours (when charging is completed, there is
an indication lamp). Don't overcharge and overdischarge. Don't
reverse the positive and negative electrodes when charging.
3. When the flashlight is in use, according to the requirements of
the flashlight on voltage and battery, it should not be used in
disorder in order to prevent the burning of circuit boards.
Batteries of different types and voltages should not be used at the
same time.
4. In use, when the brightness of the flashlight changes
significantly, the flashlight should be turned off to prevent
excessive discharge of battery power and charging in time; pay
attention to the water-proof, moisture-proof and fall-proof of of
the battery. When charging, according to the charging speed of the
charger, the indicator lamp should be removed in time after
changing, and do not overshoot.
5. Batteries that are not used for a long time should be filled and
maintained, and charged and discharged again in about three months
to avoid chemical corrosion.
6. Keep the inner wall of the lamp cup clean. Never wipe it with
hands or hard objects. Clear the fingerprints on the lens, and
gently wipe it with a cotton swab dipped in the lens cleaner.
7. Do not contact the flashlight with sunlight, water, chemicals
and corrosive gases for a long time to avoid damaging the
flashlight.
8. Non-professionals should not disassemble flashlights to prevent
damage to circuit boards.
Performance characteristics
The imported LED light source and reflective system are adopted,
with soft light, good condensing, high brightness, and the
effective irradiation distance is more than 200 meters;.
High-energy non-memory battery, large capacity, long life, low
self-discharge rate, economical and environmentally friendly;
The protection level is IP66, and it can be used at 1 meter
underwater;
The explosion-proof grade is Ex ic IIC T3 Gc, which is the
highest international and domestic explosion-proof grade, and it is
safe and reliable to use;
Imported large-capacity lithium batteries are used, and the
continuous discharge time is more than 8 hours and the working
light is more than 12 hours;
Special alloy shell, beautiful appearance, strong impact
resistance;
Unique annular heat conduction and heat dissipation design,
exquisite structure, beautiful and light, simple and convenient
operation; waterproof, high and low temperature resistance, high
humidity, good performance, and can be used in various harsh
environments and climatic conditions;
The lamp battery is equipped with battery over-discharge,
over-charge and short-circuit protection devices; the intelligent
charger is equipped with over-charge, short-circuit protection and
charging display devices;
Equipped with a magnetic adsorption device, which can be held by
hand or attached to the surface of ironware, effectively freeing
both hands.
Feature:
1. Beautiful appearance, easy to carry
2. Magnetic adsorption
3. The illumination distance is up to 200 meters
4. Special alloy
5. It can be used 1 meter underwater
